13
1
Water temperature and failure codes can be seen at LED
display
2
Target (set) water temperature value
3
Control pannel priority indicator
4
Burner operation (combustion) indicator
5
Fan operation indicator
6
Water Flow Indicator
7
Temperature Unit Indicator
8
Temperature Setting Buttons
9
Priority assignment button.
10 On / Off Button
The activation of the water heater should be done by the Authorized Service.
For this, please contact the authorized service in your region.
Conrol if the gas, electricity and water properties are same values specified in
this manual and on the label on the device.
Do not supply electric to water heater before connecton of control pannel.
Make sure that all connections of the device are correct and complete.
Control pannel must be match with water heater. For this;
Open the fuse which water heater is connected.
6.1.1. Control Pannel Matching
6.1. Water Heater Operation And Setting
