10
Do not supply electric to water heater before connecton of control pannel.
Children's access to the remote control should be prevented.
The installation of control pannel must not be done near heat sources and
humid places.
After separating the top cover of the remote control from the control base with a
screwdriver, fix the control base with screws from the mounting holes on the wall
in the desired area.
Connect the connector to the cable that will provide the connection between the
water heater and the control panel and place it in its place on the control panel.
Complete the connection by fixing the other edge of the cable to the connection
point under the water heater.
Maximum 3 control panels can be connected to the water heater. Control panels
must be connected parallel to each other.
5.3. Installation Of Control Pannel and Connection Of Heater
