12
Connect the cold water inlet of water heater the cold water mains line, and the
hot water outlet to the hot water line with a 3/4" flexible pipe. For preventing
water leakage of connections, seals must be used.
Do not never use liquid seal for water line connections.
Valve with TSE and flexible pipe must be used for the gas connection.
Definitely teflon and liquid seal must not be used for gas line connections.
The electrical installation must be done by qualified personnel with suitable cable
section.
There must be a fuse with a suitable specification and6 amperes value that can
completely cut off the electricity of the device.
The fuse should be close to the device and at a distance where the cable coming
out of the device can be connected without tight.
The fuse must be at least 10 cm above from the bottom level of the device.
The grounding of device must definetely be done.
Kabloların sigortalara bağlantısı Yetkili Servis tarafından yapılmalıdır.
Connection of cables to fuses must be done by Authorized Service.
Loose cable connections can cause accidents.
6. WATER HEATER USAGE
5.5. Electric Connection
