daviteq Lidar People Counter Manual Download Page 78

Page: 78 / 93

The AG sensor is built-in with the wireless transmitter. Therefore please refer to the installation procedure in the
manual for the wireless transmitters.

No.

Phenomena

Reason

Solutions

The wireless transmitter

is still running and

sending data, however,

all the measurement

parameters are not

updated with new values

1.1

The connection between the AG tilt

sensor and the wireless transmitter

is broken!

Please consult the manufacturer for

a warranty or replacement.

1.2

The battery is almost draining off.

Check the battery status and replace

it when necessary.

The measured values

are not as expected

2.1

The installation direction is not

correct.

Please recheck the installation.

2.2

The sensor is drifting.

Please consult the manufacturer for

a warranty or replacement.

The reading values are

very noisy even though

the sensor is in a

standstill position.

3.1

The sensor AG tilt sensor got a

problem.

Please consult the manufacturer for

a warranty or replacement.

From system: HW_Error

= 1

4.1

The lost connection between the

sensor AG sensor and the wireless

transmitter

Please consult the manufacturer for

a warranty or replacement.

4.2

The sensor AG sensor got a

problem.

Please consult the manufacturer for

a warranty or replacement.

There are no moving parts or consumed parts in the AG tilt Sensor. Therefore there is no need to do
maintenance.

5. Installation

6. Troubleshooting for the AG Tilt Sensor

7. Maintenance of the AG Tilt Sensor

Summary of Contents for Lidar People Counter






























































































Search results

Summary of Contents for Lidar People Counter

Reviews:

Related manuals for Lidar People Counter

Brands by name

Popular brands

daviteq Lidar People Counter, Manual

Search results

Summary of Contents for Lidar People Counter

Reviews:

Related manuals for Lidar People Counter

Brands by name

Popular brands