59
Once a suitable location is selected, drill a 32mm diameter hole in the pipe.
Place the O-ring in the groove on the inside face of the top half of the pipe clamp.
Place the top half of the pipe clamp onto the pipe ensuring that the hole in the pipe clamp is aligned with the hole in
the pipe.
Coloque o O-ring na ranhura da face interior da metade superior da abraçadeira do tubo.
Once a suitable location is selected, drill a 32mm diameter hole in the pipe.
Place the O-ring in the groove on the inside face of the top half of the pipe clamp.
Place the top half of the pipe clamp onto the pipe ensuring that the hole in the pipe clamp is aligned with the hole in
the pipe.
O interruptor de caudal não deve ser montado na parte inferior dos tubos horizontais.
Once a suitable location is selected, drill a 32mm diameter hole in the pipe.
Place the O-ring in the groove on the inside face of the top half of the pipe clamp.
Place the top half of the pipe clamp onto the pipe ensuring that the hole in the pipe clamp is aligned with the hole in
the pipe.
Posicione a metade inferior da abraçadeira no tubo e prenda com os fixadores fornecidos. Aperte o suficien-
te para impedir fugas.
PORTUGUÊS
PORTUGUÊS
