61
Fit the lid onto the electrical enclosure and secure via the screw.
Disconnect the gas sensor from the cell.
Remove the brass connector from the white wire on the cell cable. Strip the white wire and attach to the brown
wire from the flow switch via the supplied crimp.
Fit the brass connector on the lead from the flow switch onto the gas sensor on the cell.
Retire o conector de latão do cabo branco no cabo da célula. Descarne o cabo branco e ligue-o ao cabo
castanho do interruptor de caudal com o descarnador fornecido.
Fit the lid onto the electrical enclosure and secure via the screw.
Disconnect the gas sensor from the cell.
Remove the brass connector from the white wire on the cell cable. Strip the white wire and attach to the brown
wire from the flow switch via the supplied crimp.
Fit the brass connector on the lead from the flow switch onto the gas sensor on the cell.
Encaixe o conector de latão no fio do interruptor de caudal no sensor de gás da célula.
Fit the lid onto the electrical enclosure and secure via the screw.
Disconnect the gas sensor from the cell.
Remove the brass connector from the white wire on the cell cable. Strip the white wire and attach to the brown
wire from the flow switch via the supplied crimp.
Fit the brass connector on the lead from the flow switch onto the gas sensor on the cell.
PORTUGUÊS
PORTUGUÊS