Davey EcoMatic COMM1000, Installation And Operating Instructions Manual

Page: 11 / 120

11
Once a suitable location is selected, drill a 32mm diameter hole in the pipe.
Once a suitable location is selected, drill a 32mm diameter hole in the pipe.
Place the O-ring in the groove on the inside face of the top half of the pipe clamp.
Place the top half of the pipe clamp onto the pipe ensuring that the hole in the pipe clamp is aligned with the hole in
the pipe.
Place the O-ring in the groove on the inside face of the top half of the pipe clamp.
Once a suitable location is selected, drill a 32mm diameter hole in the pipe.
Place the O-ring in the groove on the inside face of the top half of the pipe clamp.
Place the top half of the pipe clamp onto the pipe ensuring that the hole in the pipe clamp is aligned with the hole in
the pipe.
The flow switch should not be mounted on the underside of horizontal pipes.
Once a suitable location is selected, drill a 32mm diameter hole in the pipe.
Place the O-ring in the groove on the inside face of the top half of the pipe clamp.
Place the top half of the pipe clamp onto the pipe ensuring that the hole in the pipe clamp is aligned with the hole in
the pipe.
ENGLISH ENGLISH