background image

pag

. 5

Read the following instructions in their entirety before checking the products at the time of delivery, 

before transport and storage, installation, wiring, operation, inspection, and disposal.

PCP VOLUMETRIC PUMP DRIVE

Make sure you have correctly connected the connectors and fixed the cables.

Incorrect wiring can cause electric shock, fire, equipment damage or injury.

Do not expose cables to sharp objects or edges, excessive pressures or traction, or to objects that 

could cause them to be crushed.

Breakage or misplacement of a cable can cause electric shock, fire, equipment damage or injury. 

Do not touch any rotating part of the motor when the drive and the 

motor itself are operational.

Not observing this rule can cause injury.

Wait at least 5 minutes after switching off before removing, modifying wiring, or inspecting the 

device. Only specialized personnel can perform these operations.

Not observing this rule can cause electrical shocks.

Never touch the inner parts of the drive. 

Failure to observe this warning can result in injury.

Do not remove cables, connectors, protective or optional elements while the power supply is on, or in 

the absence of the appropriate safety systems.

Failure to observe this warning can cause electric shock or equipment damage.

Do not approach the machine immediately after resetting a momentary power failure, to 

avoid unexpected restarts.

Failure to observe this warning can result in injury.

Do not touch the motor or the drive during operation. The surface may reach high 

temperatures.

Not observing this warning can cause burns.

Do not subject the product to water, corrosive liquids, flammable gases or combustible 

gases.

Not observing this rule can cause fires.

DANGER

rotor

Summary of Contents for PCP

























Reviews: