pag
. 13
PCP VOLUMETRIC PUMP DRIVE
4.2 Thermal dissipation
The trend of the thermal dissipation in relation to the supplied current is shown below.
4.3 Electrical connections
Below is the trend of the thermal dissipation in relation to the supplied current.
• Avoid short-circuits, incorrect mass conductor connection, and polarity inversions.
• Check the voltage levels before plugging in the power connector.
• Always connect the ground terminal.
The electric current required to control the PCP pumps is 2.5 A.
ATTENTION
5
1,0
2,0
3,0
4,0
5,0
6,0
7,0
Amperes
Watts
10
15
20
25
30
