Operating instructions
During installation, protections must be provided for over-currents, for electricity leakage,
for over-temperatures, as well as emergency stop devices.
Failure, in the absence of protection, can cause electrical shock, injury or fire.
Strictly follow the instructions and procedures contained in this manual to verify the
correct installation.
Malfunctions that occur, due to incorrect installation, damage the equipment and can cause accidents or serious
injuries.
Installation, wiring, and consultancy relating to inspections and malfunctions must only be
carried out by authorized personnel.
Failure to observe this warning can cause electrical shock, injuries, fires, damage, or malfunctions.
Install an emergency stop device on the machine to ensure its safety.
Failure to observe this warning can cause electric shock, injury, fire.
Applications and installations must meet all applicable safety requirements.
Failure to observe this warning can result in injury.
Make sure that the devices have been properly grounded. Connect the grounding terminal,
in compliance with the regulations for electrical installations. (Ground resistance <100Ω)
Not observing this rule can cause electrical discharges.
Use properly sized equipment for the type of load to be handled.
Failure to observe this warning can result in equipment damage or injury.
Do not carry the drive or motor holding it by the cables or the motor shaft.
Failure to observe this warning can result in malfunctions or injuries.
REQUIRED
ATTENTION
