10
Cardio-Sensor belt correctly worn
Ear clip
Cardio Sensor-Belt
Heart rate measurement
Ear Pulse Rate Measure
Every heart pulse modulates the light passing through the lobe, and can thus
be detected by an infrared sensor in the ear clip, and displayed as heart pulse
rate.
Please make sure that the ear clip is correctly put on:
1. Insert the connector into the Cardio socket.
2. You should rub the ear lobe to stimulate blood circulation.
3. Attach the ear clip to the ear lobe (the closest possible to the head). The
contact surfaces must sit entirely on the skin.
4. After the training clean the ear clip with a soft cloth and 5% soap
suds.
The variation in the display of the pulse rate variability is larger than with the
wireless pulse measure (factor 2).
Note: Strong light sources, like sunlight, halogen projectors, and neon
lamps, and also ear piercing or ear rings, or the intake of beta-blocker
could affect the measurements.
Wireless Pulse Measure - Cardio Sensor Belt
The Cardio sensor chest strap transmits the pulse rate directly to the inte-
grated wireless Cardio pulse receiver in the device. This pulse measurement
method is the most precise.
Note: Your pulse rate will be correctly evaluated over the whole measu-
ring range only if you use a non-coded wireless pulse rate transmitter.
To ensure the maximum efficiency of the Cardio sensor strap, you should
lightly humidify the contact surfaces (inner side) of the chest strap before star-
ting the training.
Note: Using two chest straps simultaneously in the same
room (about 1.5 meter) can lead to the display of a wrong
pulse rate.
See page 31 for heart rate control tables and diagrams.
!
Using the device
