DATREND Systems vPad-Mini, Operating Manual

Page: 42 / 54

vPad-Mini OPERATORS MANUAL
Once a protocol has been setup, it can be saved to a ‘named’ sequence by touching the Save icon .
When the Save icon is touched, a dialog will be presented as shown in Figure 49 , below.
If you wish to use a name that is similar to an existing name, a list of the existing ‘named’ sequences is
available as a dropdown list, per
Figure 50 from which a name can be selected and edited.
To use a ‘named’ Sequence to define the protocol for a test, use the Swipe icon, , on Page 1 to
change from the Standards List to the Sequence List and select the Sequence from the list.
Figure 48
Figure 49
Figure 50
Operation/Chapter 4
#
Page 34