Datavideo SE-4000, Instruction Manual

Page: 48 / 128

48
Clear Ani
Logo
Clear Clear the loaded ani logo
Delete Ani
Logo
Ani Logo Memory
Location
Memory locations from 0 to 999
Delete Button
Remove animated logo from a memory
location
Logo 1
X X coordinate from -50 to +50
Y Y coordinate from -50 to +50
Logo 2
X X coordinate from -50 to +50
Y Y coordinate from -50 to +50
Setup
Standard
Resolution
3840x2160p60/59.94/50/
30/29.97/25
1080p60/59.94/50/
30/29.97/25
1080i60/59.94/50
720p60/59.94/50
Resolution
Selection
Save Button
Saves the selected
resolution
Level
Audio Standards
EBU
SMPTE
AUTO (Default)
Genlock
On/Off Default: Off
H Phase -2190 – 2190 ms (Default: 0)
V Phase -1124 – 1124 ms (Default: 0)
Keyboard Brightness 1 – 7
Auto Save ON / OFF
Automatically saves the last settings before
the machine is shut down; once turned ON
auto save also occurs upon every Still Load.
Factory Def
Factory Default
Factory Default Reset loads the default
configuration from memory point 0 for all
configuration options except for the Setup.
Reset Input Names
Resets the Multiviewer labels to the default
settings
Language
English
Traditional Chinese
Simplified Chinese
Network
SE-4000 DHCP On/Off (Default: Off)
Main Unit
SE-4000 IP Address 192.168.100.101 (Default)
SE-4000 Network
Mask
255.255.255.0 (Default)
CTL DHCP On/Off (Default: Off)
Control Panel CTL IP Address 192.168.100.102 (Default)
CTL Network Mask 255.255.255.0 (Default)
Software
Software
Tap Upgrade to start the FW upgrade process
See the Firmware Upgrade section for the USB
firmware update process.
App Version
Display of version numbers only
SW Version
Firmware
OS Version