20
3.5
Multiview
The iCast 10NDI Multiview is supplied from the input connections on the rear panel and displayed on
the HDMI monitor connected to the Multiview OUT port. The Datavideo TLM-170L/V/K/F monitors
could be used. The iCast 10NDI offers two Multiview layouts. You can press the corresponding
buttons on the front panel to select either a 2x2 or 4x1 Multiview layout depicted below.
2x2
4x1
1 (HDMI/SDI)
2 (HDMI)
3 (HDMI)
4 (HDMI) / 5 (UVC)
1
(HDMI/SDI)
2
(HDMI)
3
(HDMI)
4 (HDMI)
5 (UVC)
Note: Channels 4 and 5 share the fourth quadrant and can be changed by pressing the respective
channel buttons on the front panel.
Summary of Contents for iCast 10NDI
