Datavideo iCast 10NDI, Instruction Manual

Page: 57 / 96

57
After you’ve entered and configured the scrolling text, you may enable them on the video using one
of the three ways described below:
Click “AUTO” to play the scrolling text and change lines for every 6 seconds.
Click “Start Playlist” to play the scrolling text and change lines only when the space key is pressed. At
the 15
th
line (last line), press the space key to return to the first line.
Click “News On” to select any text preview box with the mouse. When the text line turns red as the
mouse cursor is hovered over, that particular line of text is too long and certain parts have been
cropped on the screen.
Graphic
You can also add a picture to the video. You will be required to select a png file from your local hard
disk. Click Select to browse the hard drive for your graphic file then click Update to start the upload.
After the graphic file has been successfully uploaded, you can adjust the size by entering appropriate
values in the Width and Height fields.
The Effect drop-down list sets how the image enters the video. Select “Cut in” if you want the image
to appear with no effect. If you want the image to enter from either side of the screen, select “Left
to Right” or “Right to Left”.
Lastly, set the coordinates of the image. The position of the image on the screen will be shown in the
location box.
To turn on the graphic image, simply click the Graphic ON button which can be found at the bottom
of the page.