Datavideo iCast 10NDI, Instruction Manual

Page: 74 / 96

74
Network Setting
In network settings, you can either manually enter the IP address or set the device to DHCP mode
allowing the router to automatically assign the IP address to iCast 10NDI.
LAN Port
Select the Ethernet port from the list below:

eth0: LAN

eth1: WAN
Host IP Address
This field displays the IP address of the selected Ethernet port.
DHCP
In DHCP mode, the router automatically assigns the IP address to the device. If you want to manually
configure the network settings, disable this option.
Static IP Address
If the DHCP is disabled, the static IP field will be activated for the user to manually enter the IP
address. The static IP address is 192.168.1.201 by default.
Tip: If you do not know the device’s IP address, you can always use the following method to reset
the network settings.

Shut down the machine

Turn on the machine while holding down RECORD and STREAM buttons simultaneously.

Approximately after 5 seconds, release the RECORD and STREAM buttons as soon as the
button LEDs are turned ON.

The default IP address should be 192.168.1.201.
Subnet Mask
Static IP address mode requires the subnet mask, which is 255.255.255.0 by default.
Default Gateway
Static IP address mode requires the default gateway, which is 192.168.1.254 by default.
Primary DNS (Optional)
Primary DNS is required in static IP mode only but is optional.
Secondary DNS (Optional)
Secondary DNS is required in static IP mode only but is optional.
Account and Password
Set the Web UI’s login account name and password here. Click Apply to save the new login
credentials.