Datavideo iCast 10NDI, Instruction Manual

Page: 64 / 96

64
Background Color
You may either enter the RGB values or select a color from the color spectrum to set the screen’s
background
color. Then fine tune the selected color by dragging the circle cursor on the palette.
Click the color wheel button at the bottom right corner to confirm the selection.
POP
The POP mode divides the program screen into two halves
with only one channel video shown on the left and three
channel videos shown on the right. You can click the
channel buttons on the web UI as shown in the diagram
below or press the channel buttons on the front panel to switch the channel video shown on the left.
The selected channel button should illuminate red with the unselected ones showing green.
R: Red H: Hue
G: Green S: Saturation
B: Blue B: Brightness