Datavideo 4K ShowCast STUDIO, Instruction Manual

Page: 24 / 98

24
Preview/Program Rows
The Program row of buttons is typically used to select the switcher’s main Program output image. The
selected source sent to the Program outputs will be backlit Red on this row. Simple cuts between
sources can be performed on this row by pressing on the source number required for the next shot.
The Preview row of buttons is typically used to select the switcher’s Preview or Next source output
image. The selected source will be backlit Green on this row.
Switcher Functions
The switcher functions are divided into three groups, namely switcher (camera presets), setup
(camera setup) and menu (OSD menu).
Switcher (Camera Presets)
The Showcast-100 allows you to remotely
control three cameras in use via RS-232/422
Remote ports. You can store up to four PTZ
positions for each camera. Each preset button
corresponds to one stored PTZ position. The
button LED will be turned ON when selected.
To save a camera’s PTZ position to a preset
button, first press the STR button to enter the
Showcast-100 into the STORE MODE, which,
when activated, allows the current PTZ position to be stored in a Channel Preset by pressing the
corresponding preset button. Press the STR button again to exit the store mode.