Datavideo 4K ShowCast STUDIO, Instruction Manual

Page: 17 / 98

17
Camera Control Audio Control
Camera channel selection buttons Volume adjustment sliders
(CH1/CH2/AUX/Digital/Master)
Joystick – PAN/TILT Headphone jack
ZOOM Knob Headphone volume control knob
PTZ LOCK button Audio meter
Transition Control Stream Control
Scroll wheel Bitrate button
Transition Speed selection buttons (F/M/S) H/M/L LED indicators
PIP Keyer Enable/Disable button Record button
Luma Keyer Enable/Disable button Stream button
Fade-to-Black (FTB) Enable/Disable button Vertical button
WIPE/MIX Enable/Disable button Storage Media
CUT Enable/Disable button SD card slot
Auto Transition Enable/Disable button
Camera Control
Camera Channel Selection Buttons
Press to select the camera that you would like to
control. You can control up to three connected
cameras on the ShowCast-100.
Joystick – PAN / TILT
PAN – Move the joystick left or right to pan the
selected PTZ camera head.
TILT – Move the joystick up or down to tilt the
selected PTZ camera head.
Note: Before attempting to use the joystick to PAN
or TILT a selected camera, first make sure the
LOCK button is not enabled. If the LOCK button
LED is ON, the joystick is locked; press the LOCK
button to unlock the joystick.
ZOOM Knob
ZOOM – Turn the zoom knob
clockwise or anti-
clockwise to have the selected PTZ camera zoom
in or out.
Note: Make sure the LOCK button is not enabled.
If the LOCK button LED is ON, the knob is locked;
press the LOCK button to unlock the knob.