Datavideo 4K ShowCast STUDIO, Instruction Manual

Page: 51 / 98

51
6. Double click the NVS-31 MARK IV’s IP address, and your browser should open up with a login
screen shown below. You can also manually enter the device IP address into the address bar of a
browser on your laptop then hit the ENTER button.
7. Enter the login credentials (Username: admin/Password: 000000) to log in to the web UI shown
below.
Brief descriptions of the tabs are provided as follows:
Source: View and configure various video sources.
Operation Mode:
-
Record: Configure the two built-in recorders.
-
Streaming: Configure the two built-in stream servers.
CG: Create textual or graphic layers ( Text , News , Graphic , Logo and Animation ) on the videos.
Monitor: Set the HDMI output frame rate and volume of the embedded audio.
System: System settings include network setting , login credentials , time setting , firmware update ,
disk formatting , device name , timeout duration , reset and reboot .
Note: In Networking Setting, you will be allowed to enable/disable DHCP; see the following sections
for details on connecting in the respective modes.