Datavideo 4K ShowCast STUDIO, Instruction Manual

Page: 43 / 98

43
On the Network Setting page, you may change the device name by modifying the Host Name field.
You will also be able to see the device model name, the MAC address and the IP address. You will not
be allowed to modify the network settings if the device is in DHCP mode.
To manually assign an IP address to your device, simply select the “Using Fixed IP Mode” checkbox
then enter a custom IP address, subnet mask, default gateway IP (optional), and primary and
secondary DNS servers (optional).
Click the “Save” button to write the new information into the device. Right after the “Save” button is
clicked, you will be able to see a prompt message at the top right corner to request for a device
reboot. New settings will be applied after the reboot.
To reset, simply click the “Default” button.