VLASE
TM
IR
76
6
6 ACCESSORIES
The accessories listed here below are described for information purposes only, and are not necessarily
included in the packaging. The minimum contents of the packaging include the main hardware, cables and
keys. For additional information, please refer to paragraph 1.2.
6.1 CONTROL BOX
Control and command device able to manage:
•
System warmup
•
Opening the Shutter and enabling laser emission
•
Starting and Stopping the marking process
•
Showing the marking process status
•
Showing the system error status
Figure 61: Control Box (Ordering no: 985330031).
1
Key selector
Selector switch for
EXT_KEY
control signal
2
Enable selector / ENABLE indicator
Selector switch for both
EXT_ENABLE_A
and
EXT_ENABLE_B
control signals with LED indicator
for
ENABLE_OUT
control signal
3
Alarm indicator
LED indicator for
SYSTEM_ALARM
control signal
4
Start button / BUSY indicator
Pushbutton for
START_MARKING
control signal with LED indicator for
BUSY
control signal
5
Stop button / END indicator
Pushbutton for
STOP_MARKING
control signal with LED indicator for
END
control signal
6
READY indicator
LED indicator for
SW_READY
control signal
7
External connector
Connection to Command Box connector
* Refer to Command Box connector (see paragraph 2.4.3) for detailed control signal descriptions.
WARNING!
If the Control Box is used, the marking system works in
DANGEROUS
condition.
Summary of Contents for VLASE IR 1PWX-TLS2
