![background image](http://html1.mh-extra.com/html/datalogic/tc1200/tc1200_reference-manual_4199290016.webp)
TC1200 REFERENCE MANUAL
4
2
2.1.2 Electrical
Connections
The TC1200-1000 Scanner is equipped with a 9-pin Male D-Sub connector for connection to
the power supply and input/output signals. The details of the connector pins are indicated in
the following table:
Figure 2 - 9-pin Male D-sub Connector
9-pin Connector
1 VCC
+5Vdc
2 GND
Ground
3 RX
Receive
Data
4 TX
Transmit
Data
5
OUT1 +
Output signal 1, positive
6
OUT1/2 -
Output signal 1/2, negative
7
OUT2 +
Output signal 2, positive
8
EXT-TRIG +
External Trigger Input, positive
9
EXT-TRIG -
External Trigger Input, negative
Table 1 - TC1200-1000 Scanner Pinout
The TC1200-1100 Scanner is equipped with a USB Type A connector for connection to the
PC standard USB Port. The details of the connector pins are indicated in the following table:
Figure 3 – USB Type A Connector
USB Type A Connector
1 VCC
+5
Vdc
2
DATA -
USB Data, negative
3
DATA +
USB Data, positive
4 GND
Ground
Table 2 - TC1200-1100 Scanner Pinout
Summary of Contents for TC1200
