Datalogic SG4-14-030-OO-P, Instruction Manual

Page: 58 / 108

SG4 EXTENDED INSTRUCTION MANUAL
50
7
BCM Configuration: Override Mode
Level Led 8 ON Green
Edge Led 8 OFF
ACM Configuration: Override Mode
7.8.2 Override timeout
BCM mode
In both modes Override status timeout is 120s: if Override conditions remain active and both
Override contacts remain closed (this condition only in Level Trigger Mode) more than 120s,
the Override goes low in any case after a maximum of 120s.
ACM mode
Override timeout is the maximum duration of override. This time can be chosen by the user
from a minimum of 1 minute to a maximum of 256 minutes.
After timeout the override ends even if the conditions for its activation are still existing and
the override inputs are active.
OVERRIDE STATUS is an output signal that informs the user if the override inputs are active
with override conditions present.
Fig. 51 – Override timeout timings