Datalogic SG4-14-030-OO-P, Instruction Manual

Page: 10 / 108

SG4 EXTENDED INSTRUCTION MANUAL
2
1
The device consists in 2 units that, according to the model, are composed by one or several
emitting and receiving modules. The receiver is the main controller for all functions. It
monitors all safety actions in case of failure and performs general functions as well.
During installation, an user interface facilitates the alignment of both units (see chapter 5
“
Alignment procedure
”).
As soon as an object, a limb or the operator’s body accidentally interrupts one or some of the
infrared beams sent by the emitter, the receiver immediately opens the OSSD outputs and
blocks the MPCE machine (if correctly connected to the OSSD).
Some parts or sections of this manual containing important information for the user or
installing operator are preceded by a note:
The information provided in the paragraphs following this symbol is
very important for safety and may prevent accidents.
Always read this information accurately and carefully follow the advice
to the letter.
GUI
The paragraphs containing descriptions reported on the GUI too are
written with this character.
This manual contains all the information necessary for the selection and operation of the
safety devices.
However, specialised knowledge not included in this technical description is required for the
planning and implementation of a safety light curtain on a power-driven machine.
As the required knowledge may not be completely included in this manual, we suggest the
customer to contact Datalogic Technical Service for any necessary information relative to the
functioning of the SG light curtains and the safety rules that regulate the correct installation
(see chapter 9).