Symbology Selection
Enter/Exit Programming Mode
Product Reference Guide
215
QR Code
Set Length 1
Specifies one of the bar code lengths for
QR Code Length Control on page 214
.
Length 1 is the minimum label length if in
Variable Length
Mode, or the first
fixed length if in Fixed Length Mode. Characters can be set from 0001 to 7,089
characters in increments of 0001 (pad with zeroes).
See
for detailed instructions on setting this feature.
$CQRL1
Select QR Code Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
acters in
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
0001 = Length 1 is 1 Character
Summary of Contents for RIDA DBT6400
