Datalogic RIDA DBT6400, Product Reference Manual

Page: 101 / 314

Reading Parameters Enter/Exit Programming Mode
Product Reference Guide 93
RGB LED Settings
The following configuration items specify settings for the RGB (Red Green Blue)
LEDs, which are used to indicate Good Read and Body Illumination when Scan-
ner is in Idle mode.
To set the RGB LEDs to a desired color and brightness:
1. Install Datalogic Aladdin™ (v 1.12.0.0.0 or later) on your computer.
2. Connect the scanner you want to program to the computer.
3. Select Device Autodetection > Search on Connection and follow instruc-
tions to set up communication with the scanner.
4. After the Configuration screen opens, click on RGB Led Settings in the
Reading Parameters folder (Expert Mode) to open RGB dialog.
WARNING
Depending on the setting of RGB LED configuration parameters, the oper-
ating time between the charges is reduced.