Datalogic RIDA DBT6400, Product Reference Manual

Page: 177 / 314

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 169
Standard 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for Standard 2 of 5 Length
Control on page 167 . Length 2 is the maximum label length if in Variable
Length on page 167 Mode, or the second fixed length if in Fixed Length on
page 167 Mode. Length includes the bar code’s check and data characters.
The length can be set from 1 to 50 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See "Set Length 2" on page 250 for
more detailed programming instructions.
Select Standard 2 of 5 Length 2 Setting
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
Appendix D, Key-
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
50 = Length 2 is 50 Characters
$CS2L2
~