Datalogic Matrix 210 Reference Manual Download Page 6 | Manualshive

Page: 6 / 142

background image

vi

REFERENCES

CONVENTIONS

This manual uses the following conventions:

"User"

refers to anyone using a Matrix 210™ reader.

"Reader" refers to the

Matrix 210™ reader.

"You" refers to the System Administrator or Technical Support person using this manual to
install, configure, operate, maintain or troubleshoot a Matrix 210™ reader.

REFERENCE DOCUMENTATION

For further details refer to: the VisiSet™ Help On Line, Matrix Reading Methods, Matrix Host
Mode Programming, Matrix SW Parameter Guide, Matrix Code Quality Verifier Solution
provided as supplementary documentation on Mini-DVD.

SUPPORT THROUGH THE WEBSITE

Datalogic provides several services as well as technical support through its website. Log on
to

www.datalogic.com

and click on the

Industrial Automation

links for further information:

Products - Industrial Automation - Identification

Select your product from the links on the

Identification

page. The product page

describes specific Info, Features, Applications, Models, Accessories, and Downloads
including documentation, software drivers, and the

VisiSet™ utility program, which allows

device configuration using a PC through Serial and Ethernet interfaces.

Support & Services - Industrial Automation

Several links from the

Industrial Automation

list take you to additional services such as:

Service Program which contains Maintenance Agreements and Warranty Extensions;
Repair Centers; On-Line RMA Return Material Authorizations; Technical Support through
email or phone, Partner Program; Downloads for additional downloads.

PATENTS

This product is covered by one or more of the following patents:

U.S. patents: 6,512,218 B1; 6,616,039 B1; 6,808,114 B1; 6,997,385 B2; 7,102,116 B2;
7,282,688 B2

European patents: 999,514 B1; 1,014,292 B1; 1,128,315 B1.

Additional patents pending.

«
...
4
5
6
7
8
...
»

Summary of Contents for Matrix 210















































































































































Reviews:

No comments

Related manuals for Matrix 210

Brand: Kanomax Pages: 26

Brand: Macnaught Pages: 20

Brand: Eaton Pages: 53

Brand: Oceanic Pages: 75

Brand: Hanna Instruments Pages: 2

Brand: Hanna Instruments Pages: 2

Brand: Hanna Instruments Pages: 2

Brand: Hanna Instruments Pages: 4

Brand: Hanna Instruments Pages: 2

Brand: Keithley Pages: 343

Brand: Keithley Pages: 334

Brand: La Crosse Technology Pages: 2

Brand: Aktobis Pages: 7

IMI SENSORS 604B11

Brand: PCB Piezotronics Pages: 19

DUSTHUNTER C200

Brand: SICK Pages: 126

Brand: Cal Test Electronics Pages: 12

Brand: Circutor Pages: 48

miniSERIES Series

Brand: Valeport Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands