manualshive.com logo in svg

Datalogic EtherNet/IP DS6 00 Series, Installation And User Manual, Page: 26 / 54

Share
Download
Datalogic EtherNet/IP DS6 00 Series Installation And User Manual Download Page 26

Installation and User Guide 

 

DS6x00 EtherNet/IP Scanner 

Rev  1.02 

 

Maximum Fragment Data Buffer Size 

 
The Maximum Fragment Data Buffer Size is the length of the fragment buffer.  This value must 
be less than or equal to the Maximum Item Data Buffer Size.  The valid range is 1 – 450.  The 
default size is 450 (no fragmentation is used).   
 

5. 

Instance Attribute Semantics 

 

Expected Number Of Barcodes Per Item 

 
The DS6x00 supports Item Data packets with multiple barcodes.  The Expected Number of 
Barcodes Per Item is the number of barcodes embedded in the Item Data.  The default size is one 
barcode. 

 
Item Status 

 
The Item Status Code is the status of the current Item Data packet and is returned with every 
Item Data transfer.  The table below shows the status codes and their meanings. 

 

Item Status Code 

Item Status Name 

0x0000 Good 

Read 

0x0001 

Complete, No Read 

0x0002 Partial 

Read 

0x0003 Multiple 

Read 

0x0004 Wrong 

Read 

 
Item Data Size 

 
The Item Data Size is the total size of the Item Data.  If the Item Data Size is greater than the 
Maximum Fragment Data Buffer Size, fragmentation is used (see the fragmentation example at 
the end of this section). 

 
Item Sequence Number 

 
The Item Sequence Number is incremented by one on every new Item Data production.  The 
Item Sequence Number is set to zero at power up.  Once an Item Data packet is ready to 
transmit, the Item Sequence Number is set to one.  The Item Sequence Number reloads to one 
since zero is an invalid number. 
 

Fragment Sequence Number 
 

The Fragment Sequence Number is set to one on the first fragment of the Item Data production.  
The Fragment Sequence Number is incremented by one on every new fragment.  If 
fragmentation isn’t used, this value is fixed at one. 

 

© 2004 Datalogic S.p.A. – All Right Reserved 

Page 26 of 54 

 

 

Summary of Contents for EtherNet/IP DS6 00 Series























































Reviews:

No comments