A20 Hardware Guide
System Specifications
2-3
Datalogic Automation Inc.
System Specifications
This section lists the general operating specifications for the Datalogic A20 camera. More detailed specifications are listed
in other appropriate sections of this manual.
Operating Environment
Characteristics
The A20 camera’s optical and speed characteristics and the imager’s relative response are here.
The camera’s relative sensitivity to light is approximately 78% of the sensitivity of the T-Series camera and the C-Series
5200 camera.
Dimensions
2.678 w x 5.5 h x .945 d (inches)
68 w x 139.7 h x 24 d (mm)
Weight
.96 lb. (.44 kg.)
Input Power
+24 VDC
+/- 10%
.50 A (min)
Temperature
Humidity
0° to +50° C ((+32 to +122 F)
20% to 80% (non-condensing)
Vibration Resistance
10 mm @ 5 to 500 Hz
5 g @ 11 to 200 Hz; 2 hours on each axis
Shock Resistance
EN55022A
100g; 6 ms
10 shocks on each axis
Protection Class
IP50
Pick-up Device
CMOS active pixel sensor with 752 (H) x 480 (V)
pixel image
Imager
Type 1/3 (5.35mm diag) - 4.51mm(H) x
2.88mm(V)
Capture Rate
60 full-resolution fps; higher with partial scan
Rel
a
ti
ve R
e
sp
onse
Wavelength (nm)
