LED Ringlight Adapter
A20 Hardware Guide
Datalogic Automation Inc.
3-6
•
One Allen wrench to adjust the adapter set screw (Part # 357-0229)
To mount the adapter to the LED ringlight (see figure 1)
1. Using the Allen wrench, loosen the set screw on the edge of the adapter
2. Using the four screws, mount the adapter to the ringlight
3. Slide the adapter and ringlight over the adapter mounting ring on the camera
4. Be sure the retaining flanges on the adapter are centered in the mounting ring
5. Gently tighten the set screw until the adapter is firmly attached to the camera. Do not overtighten.
Adapter set screw
Mounting Adapter
Allen
Wrench
Mounting
Screws
