I/O Terminal Block
A20 Hardware Guide
Datalogic Automation Inc.
5-2
I/O Terminal Block
This diagram illustrates the 25-pin high density male to screw terminal I/O block (Part # 248-0138). This terminal block
can be mounted on a DIN rail, connected to the camera with the optional terminated I/O cable, then wired from the termi-
nal block to the controlled devices (see “Terminal Block Connection Table” on page 5-3).
25-pin cable connector
to camera
I/O Plus Terminals
+24 VDC
Power
Serial Cable
I/O Minus Terminals
Ground
Plus Minus
