A20 Hardware Guide
LED Ringlight Specifications
3-7
Datalogic Automation Inc.
LED Ringlight Specifications
This table lists the power and trigger specifications for the ringlight.
Power Input Voltage
24 VDC
Power Input Current
0.7 Amps Strobe
0.3 Amps Static
Trigger Input Voltage
0-26 VDC
Trigger Turn-On Voltage
>3.3 VDC
Trigger Turn-Off Voltage
<1.5 VDC
Adapter Mounting Holes 2M x 4mm (x 4)
Countersunk side out
Rear
2. Mount the adapter to
the ringlight and tighten
the mounting screws
LED ringlight
Side
Figure 1
1. Loosen the set screw
A20 Camera
Adapter
Adapter Mounting
Ring
3.Slide the adapter and ring-
light over the adapter mount-
ing ring on the camera
Retaining flanges**
4.Be sure the retaining
flanges** on the adapter are
centered in the mounting ring
5.Gently tighten the set screw*
until the adapter is firmly attached
to the camera. Do not overtighten
Set Screw*
