DataKinetics DSC110 / DSC210 User Manual Issue 12
Page 109
7.17.6 Custom Profile Calling Number Change
CPCGC
Custom Profile Calling Number Change
This command is used to change a calling party number custom profile The profile is
used on a point of origin or outgoing route basis to modify fields within the calling
party number prior to transmission in a signalling protocol message.
Syntax
CPCGI:CPCG=,[CGMX=,][CGNA=,][CGPR=,][CGNP=,][CG2NA=,][CG2PR=,]
[CG2NP=,][CGCB=,][LABEL=,];
Prerequisites
The calling party number custom profile has already been initiated.
Attributes CONFIG
Example CPCGI:CPCG=16,CGNP=2,CGPR=1;
7.17.7 Custom Profile Calling Number End
CPCGE
Custom Profile Calling Number End
This command is used to end a calling party number profile.
Syntax
CPCGE: CPCG=;
Prerequisites
The specified calling party number profile must already have been initiated.
The profile cannot be attached to a point of origin or outgoing route.
Attributes CONFIG
Example CPCGE:CPCG=3;
