DataKinetics DSC110 / DSC210 User Manual Issue 12
Page 107
7.17 Custom Profiles
7.17.1 Custom Profile Called Number Initiate
CPCDI
Custom Profile Called Number Initiate
This command is used to initiate a called party number custom profile. The profile is
used on a point of origin or outgoing route basis to modify fields within the called
party number prior to transmission in a signalling protocol message.
Syntax
CPCDI: CPCD=,[CDNA=,][CDNP=,][LABEL=,];
Prerequisites
The called party number custom profile has not already been initiated.
Attributes CONFIG
Example CPCDI:CPCD=16,CDNP=2,CDNA=1;
7.17.2 Custom Profile Called Number Change
CPCDC
Custom Profile Called Number Change
This command is used to change a called party number custom profile The profile is
used on a point of origin or outgoing route basis to modify fields within the called
party number prior to transmission in a signalling protocol message.
Syntax
CPCDI:CPCD=,[CDNA=,][CDNP=,][LABEL=,];
Prerequisites
The called party number custom profile has already been initiated.
Attributes CONFIG
Example CPCDI:CPCD=16,CDNP=2,CDNA=1;
7.17.3 Custom Profile Called Number End
CPCDE
Custom Profile Called Number End
This command is used to end a called party number profile.
Syntax
CPCDE: CPCD=;
Prerequisites
The specified called party number profile must already have been initiated.
The profile cannot be attached to a point of origin or outgoing route.
Attributes CONFIG
Example CPCDE:CPCD=3;
