5-8
Advanced information
12.
In the Printers dialog box, double-click on the Add Printer icon. (Only
the administrator can use this icon to install the printer on the PC.)
13.
Follow the instructions on your screen and the guidelines below to
complete the installation.
•
Select the "My computer" choice, not the "Network" choice. If the
"My computer" choice is not available, make sure you have
logged on as the administrator.
•
Select the port to which you have connected the printer.
•
Do not select the "Enable printer pooling" choice when installing
the printer driver.
•
When the Manufacturers list appears, insert driver diskette 1 and
select the Have Disk button. If needed, select the Browse button to
specify the location of the printer driver diskette.
•
When the Printer Name box appears, change the printer name to
match the name on the front of your printer. For example, you
might change "DataCard Select Class" to "ImageCard S2" or
"UltraGrafix S".
•
When you make changes to the printer driver name, do not use
the <>:"/\ and | characters. The PC will not be able to enable the
driver if you use those characters.
•
Printer sharing is not supported by the printer driver for
Windows NT 4.0.
•
If you are updating the driver, select the "Replace existing driver"
choice in the Add Printer wizard (not the Windows NT-
recommended "Keep existing driver" choice).
•
Do not print a test page as part of the installation. You must select
the ribbon type before printing a test page, as explained below.
•
Remove the current diskette and insert the next diskette when
prompted.
•
A Version Conflict dialog box might appear during the
installation. If so, select Yes to keep the existing files on your PC.
14.
Remove the diskette and restart Windows NT when prompted after
the printer driver is installed.
Note: If you earlier asked to print a test page, test page messages
might appear at the same time as the prompt to restart Windows NT.
Even if the test page does not print, select "Yes" when the message
appears. Restart Windows NT and continue to follow this procedure.
15.
When the PC restarts, log in as the administrator again.
16.
Follow instructions to update the printer firmware if prompted.
