DataCard CE875 Installation And Administrator'S Manual Download Page 36

Page: 36 / 140

Printer Installation

Clean the Inside of the Printer

Use the following procedure to clean the inside of the printer. Do this procedure after you have
cleaned the printhead cam rollers using the sticky cleaning card.

Power on the printer.

Unlock the input hopper lock.

Peel off the wrapper from the other side of the cleaning card.

Insert the cleaning card.

Single-Hopper Printer

Open the input hopper cover.

Insert the cleaning card into the input hopper.

Multi-Hopper Printer

Insert the cleaning card into the multi-
hopper exception slide.

Close and lock the printer.

The cleaning card may become bowed slightly during
shipment. If the card is bowed, make sure that you
insert the card into the printer as shown.

Card Bow

Summary of Contents for CE875













































































































































Search results

Summary of Contents for CE875

Reviews:

Related manuals for CE875

Brands by name

Popular brands

DataCard CE875, Installation And Administrator'S Manual

Search results

Summary of Contents for CE875

Reviews:

Related manuals for CE875

Brands by name

Popular brands