DataCard CE875, Installation And Administrator'S Manual

Page: 101 / 140

CR825 and CE875 Instant Issuance System Installation and Administrator’s Guide 85
Change settings as needed, and then click Set Current to apply changes.

CustomCharHigh—Specify the numeric value of the highest ASCII character supported for
input data on the track.

CustomCharLength—Set the number of bits to represent one character of data on the track,
also called bits per character.

CustomCharLow—Specify the numeric value of the lowest ASCII character supported for
input data on the track.

CustomCharMask—Specify the mask value that is subtracted from the ASCII numeric value to
get the encoded value.

CustomCharMax—Specify the maximum number of data characters for the track. The value
does not include the start sentinel or end sentinel.

CustomDensity—Specify the number of data bits per inch of magnetic stripe media for the
track, also called bits per inch or bpi. Allowed values are 75 bpi or 210 bpi.

CustomEndSentinel—Specify the last character encoded, which identifies the end of
encoded data for the track.

CustomLrc—Specify a cumulative parity bit that is encoded after the end sentinel to provide
simple error checking. Allowed values are EVEN, ODD, and NONE.

CustomParity—Specify a character-level parity bit encoded after each character to provide
simple error checking. Allowed values are EVEN, ODD, and NONE.

CustomSdsNulls—The number of nulls between each copy of the data record. You should not
change this value.

CustomSdsRecords—The number of times to encode the data record. You should not change
this value.

CustomSdsSs—The number of start sentinels before each data record. You should not change
this value.

CustomStartSentinel—Specify the first character encoded, which identifies the start of the
encoded data for the track.