DataCard CE875 Installation And Administrator'S Manual Download Page 35

Page: 35 / 140

CR825 and CE875 Instant Issuance System Installation and Administrator’s Guide

Clean the Printhead Cam Rollers

Use the double-sided, adhesive-coated cleaning card to clean the printhead cam rollers. Perform
this procedure first.

Power off the printer, if necessary.

Unlock the access door lock and open the printer access door.

Remove the retransfer cartridge (C2) from the
printer, if necessary.

Peel off the wrapper from one side of the sticky cleaning card.

Insert the cleaning card vertically into the printer between the retransfer cartridge guidepost
and the rollers. Make sure that the adhesive side of the card is facing to the right and is
touching the rollers.

Move the cleaning card up and down along the rollers to remove any debris found on the
rollers.

Continue with

“Clean the Inside of the Printer”

page 20

The ink ribbon and retransfer cartridges
are shipped inside the printer.

Ink Ribbon
Cartridge

Guidepost

Sticky
Cleaning Card

Printhead
Cam Rollers

Summary of Contents for CE875













































































































































Search results

Summary of Contents for CE875

Reviews:

Related manuals for CE875

Brands by name

Popular brands

DataCard CE875, Installation And Administrator'S Manual

Search results

Summary of Contents for CE875

Reviews:

Related manuals for CE875

Brands by name

Popular brands