DataCard CE875, Installation And Administrator'S Manual

Page: 135 / 140

CR825 and CE875 Instant Issuance System Installation and Administrator’s Guide A-15
Load the Topping Foil Cartridge
1.
Prepare the topping foil cartridge and topping roll.
a.
Remove the topping foil cartridge from the
embosser, if necessary. The topping foil
cartridge is on the left as you face the open
embosser.
b.
Place the topping foil cartridge on a flat
surface with the spindles facing up.
c.
Remove the new topping foil from its
package.
2.
Secure the supply spool into the spindle.
a.
Match the keyed pattern of the blue supply spool hub
with the right-side spindle.
b.
Push the supply spool into the spindle until it clicks
securely into place.
3.
Roll out and route the foil around the rollers on the
topping foil cartridge.
4.
Secure the silver take-up spool into the spindle.
a.
Match the keyed pattern of the take-up spool hub with
the left-side spindle.
b.
Push the take-up spool into the spindle until it clicks
securely into place.
5.
Turn the take-up spool one full turn counterclockwise to take
up foil slack.
Supply
Spool
Take-up
Spool
Take-up
Spool
Supply
Spool