Data Translation DT9820 Series, User Manual

Page: 10 / 112

About this Manual
x
• Chapter 4 , “Programming Flowcharts,” describes the processes
you must follow to program the subsystems on the DT9820 Series
module using DT-Open Layers-compliant software.
• Chapter 5 , “Calibration,” describes how to calibrate the analog
output circuitry of the DT9822 function modules.
• Chapter 6 , “Troubleshooting,” provides information that you can
use to resolve problems with the modules and the device driver,
should they occur.
• Appendix A , “Specifications,” lists the specifications of the
modules.
• Appendix B , “Connector Pin Assignments,” shows the pin
assignments for the connectors and the screw terminal
assignments for the modules.
• An index completes this manual.
Conventions Used in this Manual
The following conventions are used in this manual:
• Notes provide useful information or information that requires
special emphasis, cautions provide information to help you avoid
losing data or damaging your equipment, and warnings provide
information to help you avoid catastrophic damage to yourself or
your equipment.
• Items that you select or type are shown in bold.