Data Translation DT9820 Series, User Manual

Page: 70 / 112

Chapter 5
58
Note:
The DT9820 Series Calibration Utility is provided for
Windows 98, Windows Me, Windows 2000, and Windows XP only.
The analog input circuitry of the DT9820 Series function modules is
automatically calibrated when the module is powered up. The analog
output circuitry of the DT9822 module is calibrated at the factory and
should not require calibration for initial use. It is recommended that
you check and, if necessary, readjust the calibration of the analog
output circuitry on the DT9822 function modules every six months.
Note: Ensure that you installed the DT9820 Series software and
configured the device driver prior to using the DT9820 Series
Calibration Utility. Refer to the DT9820 Series Getting Started Manual
for more information.
This chapter describes how to run the DT9820 Series Calibration
Utility and calibrate the analog output circuitry of the DT9822
function modules.