17
III. Using the telephone
LJ-120
How to set a pause
To set a pause:
To select one ringer melody:
♦
press the
SET/HOLD
button, the display
will show
LANGUAGE
.
♦
Press the
UP/+
or
DOWN/-
button until the
display will show
PAUSE
.
♦
Press the
SET/HOLD
button. The display
will show an actual setting.
♦
Press the
UP/+
or
DOWN/-
button to
select the right time of the pause. It can be
selected
1-0
,
2-0
,
3-0
and
4-0
.
♦
Press the
SET/HOLD
button.
♦
Press the
DEL/TIME
button twice. The
telephone will return to the standby mode.
If the
DEL/TIME
button is not pressed, the
telephone will return to standby mode
after several seconds. The setting will be
stored.
Hold function
The Hold function allows music to be switched on during the conversation.
After pressing the HOLD button, the person on the other end of the line
will automatically be able to hear music. This function may be used, for
example, in offices while a client is on hold.
To switch the hold music on:
♦
inform the person on the other end of the
line about a music pause.
♦
Press the
SET/HOLD
button. The display
will show
HOLD
. The telephone will start
to play music.
Note!
In activating this function using the UP/+ or DOWN/- button,
you may select the melody you wish the caller to hear. There are
12 melodies available, from which you can choose. These are
indicated by symbols from 01 to 12.
♦
You can replace the handset on the base.
The connection will not be interrupted.
The hold music will be heard through the
speaker located in the base unit of the
telephone.
DEL/TIME
SET/HOLD
UP/+
DOWN/-
SET/HOLD
