20
III. Using the telephone
LJ-120
♦
Next press the appropriate code number
key (0-9). The number will be displayed
and dialed.
Note!
If there is no number under the code number key, the telephone
displays symbol
- - - -
.
♦
Replace the handset or press the
SP-PHONE
button to end the call.
Note!
1. Storing a number in the memory automatically deletes any
previous number kept under the individual code number you
choose.
2. The stored numbers can be reviewed in the standby mode. To
display the number from the code number key:
press the
RECALL/VIP
button,
press the code number key. The number will be displayed.
How to delete a number from one-touch and two-touch memory
During the review:
♦
Press the
DEL/TIME
button twice. The
number will be removed. The telephone
will return to standby mode.
Flash function
This allows various switchboard facilities such as call transfer and conference
calls to be used. Contact your communications manager or the person
responsible for maintaining your switchboard to find out what facilities are
available. The telephone allows the following values to be set: 100ms, 270ms,
300ms, 600ms and 1000ms. The factory setting is 100ms.
To set the right Flash value:
♦
press the
SET/HOLD
button, the display
will show
LANGUAGE
.
♦
Press the
UP/+
or
DOWN/-
button until the
display will show
FLASH
.
♦
Press the
SET/HOLD
button. The display
will show an actual setting.
1
2
3
4
5
6
7
8
9
0
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
#
SP-PHONE
SET/HOLD
UP/+
DOWN/-
DEL/TIME
