14
III. Using the telephone
LJ-120
Note!
The telephone number in the standby mode can also be entered
(before lifting the handset or pressing the SP-PHONE button).If
you wish to delete the last incorrect digit, press the DEL/TIME
button. If you wish to make a call, press the BACK/ARD button.
The 2-way speaker function will be switched on and the number
will be dialed automatically.
How to receive a call
When the telephone rings (the display and
IN USE indicator flash):
♦
lift the handset from the base unit or press
the
SP-PHONE
button.
In addition, on the side of the handset there is
the
VOLUME LOW/HIGH
rotary switch to
adjust the volume of the base’s loudspeaker.
♦
After completing your conversation,
replace the handset on the base unit or
press the
SP-PHONE
button.
OUT memory
Your telephone can store the most recently dialed numbers in the OUT
memory. They can be reviewed by pressing the
OUT/X
button in
standby
mode. Each number may consist of up to 16 digits.
Note!
The volume of the OUT memory locations depends on the volume of
the digits in the telephone number. If the stored numbers have
16 digits, the OUT memory has 20 memory locations. If the volume
of the digits decreases, the volume of the memory locations
increases. For example, for 10-digit numbers, the volume of the
memory location is 26, for 8-digit numbers the volume of the
memory location is 34.
To review OUT numbers:
♦
press the
OUT/X
button. The display
shows the last number dialed, the time of
this call and the number of the memory
location.
♦
By pressing the
OUT/X
button, the
remaining numbers can be reviewed.
If the
OUT/X
button is not pressed, the telephone will return to standby mode
after several seconds. If the memory is empty, the display will show the
symbol
- - - End - - -
.
SP-PHONE
OUT/X
