21
III. Using the telephone
LJ-120
♦
Press the
UP/+
or
DOWN/-
button to
select the right flash.
♦
Press the
SET/HOLD
button.
♦
Press the
DEL/TIME
button twice. The
telephone will return to the standby mode.
If the
DEL/TIME
button is not pressed, the
telephone will return to standby mode
after several seconds. The setting will be
stored.
How to transfer a call.
To transfer a call from one internal number
to another:
♦
press the
FLASH
button.
♦
Enter the number, to which you want to
transfer the call.
♦
Replace the handset on the base unit.
How to lock the telephone numbers.
The telephone can be blocked so that it is impossible to make a call beginning
with the digit „0”,
for example:
a Long Distance or International call, a Party Line call, or, in the case of an
office switchboard, where the number „0” facilitates an outside line , it can
block an extension number from being used by an unauthorized person. This
is an invaluable feature in the prevention of unauthorized calls and the
safeguarding of a telephone bill from unauthorized expense.
In order to use this feature the key must be placed in the lock located on the
underside of the telephone,
and then turned to the required position:
“red dot” position - the telephone can be used to dial all numbers on
the keypad including „0”.
“green dot” position – the telephone can used to block all numbers.
“yellow dot” position - the telephone has the lock activated and the
number „0” cannot be dialed.
DEL/TIME
SET/HOLD
UP/+
DOWN/-
FLASH
1
2
3
4
5
6
7
8
9
0
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
#
