13
III. Using the telephone
LJ-120
Note!
The melody ringers are available only, when the batteries are
placed in the battery compartment. If there are no batteries,
only the normal ringer will sound.
2-way speaker function
The 2-way speakerphone function allows a number to be dialed, or a call to be
made, without the handset needing to be lifted. The party on the other end of
the line will automatically be able to hear and to be heard through the speaker
located in the base unit of the telephone. When using this function, the user
needs to speak within a reasonable distance of the telephone microphone in
order that the microphone may pick-up voice sound. This function may also be
used to make a conference call between several parties in the same office.
Using the
SP-PHONE
button, the 2-way speakerphone function can be
switched on/off.
After pressing the
SP-PHONE
button, the
display will show the timer.
In addition, the
VOLUME LOW/HIGH
rotary
switch can be used to adjust the volume of the
loudspeaker.
How to make a call
To make a call:
♦
lift the handset from the base unit
or
♦
press the
SP-PHONE
button.
The display will show the timer.
♦
When the PTT on-line signal is heard, the
required number should be dialed. The
number will be displayed. After several
seconds, the call time counter will be
switched on.
♦
To end your conversation, replace the
handset on the base unit or press the
SP-PHONE
button. The time of your last
call can be displayed by pressing the
OUT/X
button (see the chapter: ”OUT
memory”).
V O L U M E
LO
W
HIG
H
V O L U M E
LO
W
HIG
H
SP-PHONE
SP-PHONE
1
2
3
4
5
6
7
8
9
0
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
#
SP-PHONE
