18
III. Using the telephone
LJ-120
♦
Lift the handset or press the
SP-PHONE
button to continue speaking. The Hold
function will be switched off.
Note!
If the handset is not replaced on the base, press the SET/HOLD
button again to switch the hold music off.
Memory
Your telephone can store 8 telephone numbers in the one-touch memory and
10 telephone numbers in the two-touch memory. The number can then be
dialed by pressing one button or two buttons. The one-touch memory locations
are located under the buttons indicating
M1-M8
and the two-touch memory
locations are located under the buttons of the keypad. Each number that is
stored can have up to 16 digits.
One-touch memory
To store a number in the memory:
♦
press the
STORE/
÷÷÷÷
button. The display
will show
INPUT NUMBER
.
♦
Enter the number, to be stored in the
memory. The number will be displayed.
Note!
The pause can be stored in the memory by pressing
RD/P
button.
♦
Now press one of the number buttons
(M1-M8). This gives you the code under
which your number will be stored. The
telephone will return to standby mode.
To dial a number using the memory
:
♦
lift the handset or press the
SP-PHONE
button.
♦
Next press the appropriate code number
key. The number will be displayed and
dialed.
SP-PHONE
STORE /
1
2
3
4
5
6
7
8
9
0
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
#
SP-PHONE
