Copyright © 2019
–
2020 DARE!! Products
Page 11
3
Installation
3.1
Connections and indicators
Install the Radi
L
ink
®
RLK2003A Plug-in card in a Radi
C
entre
®
. If a Radi
C
entre
®
was
ordered together with the Radi
L
ink
®
system, it is already installed.
The RLK2003A plug-in card has the following connections and indicators:
Green LED for Power On
SMA connector for RF output signal to measurement device
Red LED for Link Active indication
Optical DIN connector
for Analogue Link
Optical ST connector
for Digital Link
•
Connect the DIN connector of the duplex fiber, marked with a green sleeve, to
the Analogue link input of the plug-in card.
•
Connect the ST-connector of the duplex fiber, marked with a blue sleeve, to the
Digital link output of the plug-in card.
Please note that both optical connectors have a locking notch.
